OCR Feature
Moderators: TrackerSupp-Daniel, Tracker Support, Paul - Tracker Supp, Vasyl-Tracker Dev Team, Chris - Tracker Supp, Sean - Tracker, Ivan - Tracker Software, Tracker Supp-Stefan
OCR Feature
I ran the OCR feature on a page I needed to extract text from. After it was run I tried to highlight the text to copy it into WordPerfect and a problem surfaced. The text layer does not seem to line up with the original graphic layer of the pdf. This causes a problem when trying to copy certain parts of the text.
I had tried it previously with a blueprint which measured 24" x 36" and the offset between the layers was way more exaggerated. See attached.
I had tried it previously with a blueprint which measured 24" x 36" and the offset between the layers was way more exaggerated. See attached.
- Attachments
-
- OCR.zip
- (175.3 KiB) Downloaded 482 times
-
- User
- Posts: 191
- Joined: Thu Jun 02, 2011 3:23 pm
Re: OCR Feature
Hi Arnold,
I will forward this to our OCR developer and see what he has to say. He will comment here when he has the chance.
Regards,
Jamie.
I will forward this to our OCR developer and see what he has to say. He will comment here when he has the chance.
Regards,
Jamie.
- Paul - Tracker Supp
- Site Admin
- Posts: 6900
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: OCR Feature
Hi Guys,
we won't see our OCR developer team member until next week I am afraid due to the holidays. One thing I did notice guebert is that if you OCR your document again and this time select to "Convert Page Content to Image only - Add Text as Layer" then the OCR result appears correctly positioned. I have attached your "re-OCR'd" document.
Arnold, can you conform this also works for you?
we won't see our OCR developer team member until next week I am afraid due to the holidays. One thing I did notice guebert is that if you OCR your document again and this time select to "Convert Page Content to Image only - Add Text as Layer" then the OCR result appears correctly positioned. I have attached your "re-OCR'd" document.
Arnold, can you conform this also works for you?
- Attachments
-
- OCR.zip
- (967.05 KiB) Downloaded 450 times
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: OCR Feature
Does not seem to help and in addition it rotates the page 180 degrees. I have attached the page I used so it can be tested on your end.
Thanks.
Thanks.
- Attachments
-
- Pages from [DQ 12-016 Notice to Bid Page]2.zip
- (55.72 KiB) Downloaded 449 times
-
- User
- Posts: 191
- Joined: Thu Jun 02, 2011 3:23 pm
Re: OCR Feature
Thanks! We will make sure it gets passed on.
Regards,
Jamie.
Regards,
Jamie.
-
- User
- Posts: 39
- Joined: Tue Apr 20, 2010 10:48 pm
Re: OCR Feature
Hi Arnold,
We created a ticket (RT# 1395) in our internal ticket system, so we can easily follow this case.
Regards,
Katya
We created a ticket (RT# 1395) in our internal ticket system, so we can easily follow this case.
Regards,
Katya
-
- User
- Posts: 381
- Joined: Mon Jun 13, 2011 5:10 pm
Re: OCR Feature
Just an update: we have fixed this issue in our development version and so you can expect it repaired with the next release!
Thanks again for bringing it to our attention.
-Walter
Thanks again for bringing it to our attention.
-Walter
Re: OCR Feature
Thank you.
- Tracker Supp-Stefan
- Site Admin
- Posts: 17941
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
- Contact: