Default view
Moderators: TrackerSupp-Daniel, Tracker Support, Paul - Tracker Supp, Vasyl-Tracker Dev Team, Chris - Tracker Supp, Sean - Tracker, Ivan - Tracker Software, Tracker Supp-Stefan
Default view
Hi again
Like to open pdf like seen on page 1 but it opens like on page 2. With settings on page 3 with earlier versions of editor this was working if i am not wrong... Do i do something wrong?
Like to open pdf like seen on page 1 but it opens like on page 2. With settings on page 3 with earlier versions of editor this was working if i am not wrong... Do i do something wrong?
- Attachments
-
- Neues Dokument_Optimized.pdf
- (793.27 KiB) Downloaded 161 times
-
- User
- Posts: 2393
- Joined: Wed Jan 18, 2006 12:10 pm
Re: Default view
Hello,
When I look at your current "Seitenanzeige" settings, I see that the second check box "Zuletzt benutzte Layout- und Vergrösserungseinstellungen ..." is NOT checked. Please mark/activate this check box.
If you then set the display of your PDF in the way you like and then close, followed by re-open from within the Recent Files list, it will keep its last view.
Good luck and best regards.
When I look at your current "Seitenanzeige" settings, I see that the second check box "Zuletzt benutzte Layout- und Vergrösserungseinstellungen ..." is NOT checked. Please mark/activate this check box.
If you then set the display of your PDF in the way you like and then close, followed by re-open from within the Recent Files list, it will keep its last view.
Good luck and best regards.
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Thanks Willy
Zacchia - looking forward to how this goes for you.
Zacchia - looking forward to how this goes for you.
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: Default view
Good morning
I know that. But if i check this box it is not what i like... Because if i zoom in and close the file and reopen then it is zoomed like before... I like to start with one page view.
And i am very sure the settings in attachetd dokument was working in older versions. Maybe tracker can check this?
I know that. But if i check this box it is not what i like... Because if i zoom in and close the file and reopen then it is zoomed like before... I like to start with one page view.
And i am very sure the settings in attachetd dokument was working in older versions. Maybe tracker can check this?
-
- User
- Posts: 2393
- Joined: Wed Jan 18, 2006 12:10 pm
Re: Default view
Hello Zacchia,
Can it be that you are using PDF-XChange Editor in a not-maximized window, or on a screen in portrait (instead of landscape)?
I have the impression that the setting "Seite einpassen" (Fit page) only works correctly when the window is maximized and not when it is reduced.
The default setting of the document itself is also "Seite einpassen".
http://www.belux.com/media/catalogues/p ... 16_opr.pdf
Can you please check if it works correctly when the PDF-XChange Editor window is maximized and the display is in landscape mode?
Best regards.
Can it be that you are using PDF-XChange Editor in a not-maximized window, or on a screen in portrait (instead of landscape)?
I have the impression that the setting "Seite einpassen" (Fit page) only works correctly when the window is maximized and not when it is reduced.
The default setting of the document itself is also "Seite einpassen".
http://www.belux.com/media/catalogues/p ... 16_opr.pdf
Can you please check if it works correctly when the PDF-XChange Editor window is maximized and the display is in landscape mode?
Best regards.
Re: Default view
Hi Willy
It didn't work even if the window is maximated. But see attachment wehn i set Layout like seen then it works! Seams like this settings on document is prevented default settings...
It didn't work even if the window is maximated. But see attachment wehn i set Layout like seen then it works! Seams like this settings on document is prevented default settings...
- Attachments
-
- 2017-12-09 11_26_37-Dokumenteigenschaften.pdf
- (473.11 KiB) Downloaded 172 times
-
- User
- Posts: 2393
- Joined: Wed Jan 18, 2006 12:10 pm
Re: Default view
We can ask Tracker Software development to have a look at this ...
I have also seen that in Editor V7 > Preferences > Page Display, the option "Respect document's settings" has been left behind for the "Default Page Zoom" setting. I do not know if this is related to the problem.
Best regards.
I have also seen that in Editor V7 > Preferences > Page Display, the option "Respect document's settings" has been left behind for the "Default Page Zoom" setting. I do not know if this is related to the problem.
Best regards.
Re: Default view
Thanks... It seams something is not correct... Maybe we get an answer from Tracker.
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Hi guys,
this was supposed to be fixed for the next build. I just ran a quick test of the pre-release and it looked right to me. Can I ask you to test again tomorrow after the release of 7.0.323.1?
regards
this was supposed to be fixed for the next build. I just ran a quick test of the pre-release and it looked right to me. Can I ask you to test again tomorrow after the release of 7.0.323.1?
regards
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: Default view
Yep! The default wiew is now correct as adjusted...
Many thanks!!
Many thanks!!
- Tracker Supp-Stefan
- Site Admin
- Posts: 17907
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
- Contact:
Re: Default view
im sorry... it is no jet fine... I think i adjusted first the document and then i opened it.
In fact the document opens not with one page view like i wish... Sorry for confusion...
https://www.dropbox.com/s/9l7d6ljcr1egh ... t.pdf?dl=0
Settings in attachment is not working
Have a nice evening
Bruno
In fact the document opens not with one page view like i wish... Sorry for confusion...
https://www.dropbox.com/s/9l7d6ljcr1egh ... t.pdf?dl=0
Settings in attachment is not working
Have a nice evening
Bruno
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Hi Zacchia,
I copied your settings and it did open full page single page for me. Not at first however, first time I tried it opened to "fit page width" so I decided to reset all my settings, set the initial view as per your screen shot and now it works.
Are you 100% certain you do not have this file in your recents list? Your setting would override the initial view if you closed the same document with a different view as you have selected to remember that.
Can you reset your settings, close the Editor, restart it, make your initial view settings, apply it, close the Editor to force saving this preference then open your file again?
You may want to export your settings first so you can retrieve them is needed.
hth
I copied your settings and it did open full page single page for me. Not at first however, first time I tried it opened to "fit page width" so I decided to reset all my settings, set the initial view as per your screen shot and now it works.
Are you 100% certain you do not have this file in your recents list? Your setting would override the initial view if you closed the same document with a different view as you have selected to remember that.
Can you reset your settings, close the Editor, restart it, make your initial view settings, apply it, close the Editor to force saving this preference then open your file again?
You may want to export your settings first so you can retrieve them is needed.
hth
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: Default view
Hi Paul
I understand,, did everithing but still opens in 2 page view.
I understand,, did everithing but still opens in 2 page view.
- John - Tracker Supp
- Site Admin
- Posts: 5219
- Joined: Tue Jun 29, 2004 10:34 am
- Location: United Kingdom
- Contact:
Re: Default view
Hi,
Can I ask you to please check the new release from yesterday 323.2 - thanks
If you are still having issues after this - please advise your Windows OS and any other specific factors you feel could be relevant.
If you are having problems - we may need to request a remote session to see if we can identify the cause.
Thanks
Can I ask you to please check the new release from yesterday 323.2 - thanks
If you are still having issues after this - please advise your Windows OS and any other specific factors you feel could be relevant.
If you are having problems - we may need to request a remote session to see if we can identify the cause.
Thanks
If posting files to this forum - you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded - thank you.
Best regards
Tracker Support
http://www.tracker-software.com
Best regards
Tracker Support
http://www.tracker-software.com
Re: Default view
Hi
Already updated yesterday, same thing... Using Windows 7 64 bit system.
Already updated yesterday, same thing... Using Windows 7 64 bit system.
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Thanks for that Bruno,
I am seeing a different result, I need to ask one of the devs for input. If needed are you open to us taking a look on your system remotely?
regards
I am seeing a different result, I need to ask one of the devs for input. If needed are you open to us taking a look on your system remotely?
regards
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Great - we use TeamViewer for remote sessions.
You can install it or just run it. Take a look here for details on setting it up.
https://www.pdf-xchange.com/knowle ... e-an-issue
It may not be needed, let me see what the devs have to say and I'll get back to you here.
You can install it or just run it. Take a look here for details on setting it up.
https://www.pdf-xchange.com/knowle ... e-an-issue
It may not be needed, let me see what the devs have to say and I'll get back to you here.
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: Default view
im here today 1.5 hour from now on...
- Paul - Tracker Supp
- Site Admin
- Posts: 6897
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
- Contact:
Re: Default view
Thanks Bruno,
the devs won't be here for at least another hour. I'll post back here if a remote is needed.
the devs won't be here for at least another hour. I'll post back here if a remote is needed.
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Re: Default view
Can we make sometimes a remote session? Problem still here...
- Patrick-Tracker Supp
- Site Admin
- Posts: 1645
- Joined: Thu Mar 27, 2014 6:14 pm
- Location: Vancouver Island
- Contact:
Re: Default view
Hello Zacchia,
We hope to release a new build within the next few days that, as per my own tests, appears to have addressed some initial view issues. If you are still experiencing the issue with the V7.0 B324 release please contact support@pdf-xchange.com in order to arrange a remote session with our devs.
Thank you!
We hope to release a new build within the next few days that, as per my own tests, appears to have addressed some initial view issues. If you are still experiencing the issue with the V7.0 B324 release please contact support@pdf-xchange.com in order to arrange a remote session with our devs.
Thank you!
If posting files to this forum, you must archive the files to a ZIP, RAR or 7z file or they will not be uploaded.
Thank you.
Cheers,
Patrick Charest
Tracker Support North America
Thank you.
Cheers,
Patrick Charest
Tracker Support North America
Re: Default view
OK i wait for the new release, thanks.
- Tracker Supp-Stefan
- Site Admin
- Posts: 17907
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
- Contact:
Re: Default view
Thanks for your patience and understanding Zacchia!
We are almost ready with the new build - just doing some last minute testing and will release it soon (before the end of the week!)
Regards,
Stefan
We are almost ready with the new build - just doing some last minute testing and will release it soon (before the end of the week!)
Regards,
Stefan
Re: Default view
No problem, no stress!! Next week i'm at skiing at Zermatt So take your time.
- Tracker Supp-Stefan
- Site Admin
- Posts: 17907
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
- Contact:
Re: Default view
Enjoy the snow Zacchia!
Regards,
Stefan
Regards,
Stefan
Re: Default view
Good mornig. It seams that with the new version the problem is gone
Thanks a lot!
Thanks a lot!
- Tracker Supp-Stefan
- Site Admin
- Posts: 17907
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
- Contact: