Compile error
Moderators: TrackerSupp-Daniel, Tracker Support, Vasyl-Tracker Dev Team, Chris - Tracker Supp, Sean - Tracker, Tracker Supp-Stefan
-
- User
- Posts: 4
- Joined: Thu Dec 09, 2010 2:30 pm
Compile error
I changed an app from Image-Xchange to PDF-Tools and now get a compile error "Unknown Identifier: SW_NOVIEWER". What am I missing?
-
- Site Admin
- Posts: 6903
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
Re: Compile error
HI Prelude_Software,
perhaps one of the dev team might be able to look at this and tell you what is happening but I suspect that a little more detail would help. Can you provide a code snippet from the part where the compile fails?
thanks
perhaps one of the dev team might be able to look at this and tell you what is happening but I suspect that a little more detail would help. Can you provide a code snippet from the part where the compile fails?
thanks
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
-
- User
- Posts: 4
- Joined: Thu Dec 09, 2010 2:30 pm
Re: Compile error
Here is one of the lines:
WriteDocument PROCEDURE(<STRING str>,SIGNED savemode=0,SIGNED viewmode=SW_NOVIEWER),LONG,PROC ! write document to file
WriteDocument PROCEDURE(<STRING str>,SIGNED savemode=0,SIGNED viewmode=SW_NOVIEWER),LONG,PROC ! write document to file
-
- Site Admin
- Posts: 6903
- Joined: Wed Mar 25, 2009 10:37 pm
- Location: Chemainus, Canada
Re: Compile error
Thanks for that. The dev team are done for the day already so it may be Monday now before you get a reply. We will post here what we find and or if we need anything more from you to proceed.
hth
hth
Best regards
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
Paul O'Rorke
Tracker Support North America
http://www.tracker-software.com
-
- Site Admin
- Posts: 17960
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
Re: Compile error
Hello Prelude_Software,
Could you please let us know what is your programming environment? Are you a Clarion developer?
This is an important question as we will need to pass this case to the correct developer for an advise.
Best,
Stefan
Tracker
Could you please let us know what is your programming environment? Are you a Clarion developer?
This is an important question as we will need to pass this case to the correct developer for an advise.
Best,
Stefan
Tracker
-
- User
- Posts: 4
- Joined: Thu Dec 09, 2010 2:30 pm
Re: Compile error
Yes, sorry, this is Clarion v6 development environment.
-
- Site Admin
- Posts: 17960
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
Re: Compile error
Thanks Prelude_Software,
Passing this to the correct developer. We will reply shortly!
Best,
Stefan
Passing this to the correct developer. We will reply shortly!
Best,
Stefan
-
- Site Admin
- Posts: 64
- Joined: Wed Jun 30, 2004 4:45 pm
- Location: Maryland, USA
Re: Compile error
Hi!
I see it - not sure why that would be missing. I'll have to check the class files and see what's what.
I see it - not sure why that would be missing. I'll have to check the class files and see what's what.
-
- User
- Posts: 4
- Joined: Thu Dec 09, 2010 2:30 pm
Re: Compile error
Looks like this was my fault. I found where I commented out the definition of that equate. I think I did that when I was trying to get Image-Xchange and PDF-Tools in the same app. Sorry about that!
-
- Site Admin
- Posts: 64
- Joined: Wed Jun 30, 2004 4:45 pm
- Location: Maryland, USA
Re: Compile error
Hi!
Oh good! Not us then. Wish they were all like this.
Oh good! Not us then. Wish they were all like this.