Annotation flags to allow reply and status, but no other modification
Moderators: TrackerSupp-Daniel, Tracker Support, Paul - Tracker Supp, Vasyl-Tracker Dev Team, Chris - Tracker Supp, Sean - Tracker, Ivan - Tracker Software, Tracker Supp-Stefan
Forum rules
DO NOT post your license/serial key, or your activation code - these forums, and all posts within, are public and we will be forced to immediately deactivate your license.
When experiencing some errors, use the IAUX_Inst::FormatHRESULT method to see their description and include it in your post along with the error code.
DO NOT post your license/serial key, or your activation code - these forums, and all posts within, are public and we will be forced to immediately deactivate your license.
When experiencing some errors, use the IAUX_Inst::FormatHRESULT method to see their description and include it in your post along with the error code.
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Annotation flags to allow reply and status, but no other modification
I have neem trying to set the op.annots.setProps flags to bascially acheive the folloiw:
1. Stop ueer from moving, deleting, resize or change annotation colour, tex size etc.
2. Allow the user to add a reply or change the status of the annotation.
I have tried different variations, but all ssem to allow replies to comments but NOT allow the status to be changed.
Thanks Simon
1. Stop ueer from moving, deleting, resize or change annotation colour, tex size etc.
2. Allow the user to add a reply or change the status of the annotation.
I have tried different variations, but all ssem to allow replies to comments but NOT allow the status to be changed.
Thanks Simon
-
- Site Admin
- Posts: 17960
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
What combinations have you tried?
Have you tried AF_Locked + AF_ContentLocked and do these two work for you? Can a reply be placed for such an annotation?
Regards,
Stefan
What combinations have you tried?
Have you tried AF_Locked + AF_ContentLocked and do these two work for you? Can a reply be placed for such an annotation?
Regards,
Stefan
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Stefan,
This does not work either, I am using the following code. To replicate the issue, just place some annotation on a pdf and run the following code. You will notice you can add a reply, but not change the status of the annotation.
Thanks
Simon
This does not work either, I am using the following code. To replicate the issue, just place some annotation on a pdf and run the following code. You will notice you can add a reply, but not change the status of the annotation.
Code: Select all
Dim pSInt As PDFXEdit.IPXS_Inst = DirectCast(Me.docPreview.Inst.GetExtension("PXS"), PDFXEdit.IPXS_Inst)
Dim nID As Integer = Me.docPreview.Inst.Str2ID("op.annots.setProps", False)
Dim Op As PDFXEdit.IOperation = Me.docPreview.Inst.CreateOp(nID)
Dim input As PDFXEdit.ICabNode = Op.Params.Root("Input")
Dim page As PDFXEdit.IPXC_Page = Me.docPreview.Doc.CoreDoc.Pages(0)
Dim nPageCount As UInteger = page.GetAnnotsCount()
For i As UInteger = 0 To nPageCount - 1
Dim annot As PDFXEdit.IPXC_Annotation = page.GetAnnot(i)
input.Add().v = annot
Next
If input.Count = 0 Then
Return
End If
Dim options As PDFXEdit.ICabNode = Op.Params.Root("Options")
options("Flags").v = 640
options("Mask").v = 4194304
Op.Do()
Simon
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Stefan,
Any idea on this?
Thanks
Simon
Any idea on this?
Thanks
Simon
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Stefan,
I have just noticed that I posted this in the Viewer SDK, where I am actually using the Editor SDK. Could you please move it for me.
Also do you have a solution to this at all?
Thanks
Simon
I have just noticed that I posted this in the Viewer SDK, where I am actually using the Editor SDK. Could you please move it for me.
Also do you have a solution to this at all?
Thanks
Simon
-
- Site Admin
- Posts: 17960
- Joined: Mon Jan 12, 2009 8:07 am
- Location: London
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
I've moved the topic and am asking a colleague from the dev team for help with this one!
Regards,
Stefan
I've moved the topic and am asking a colleague from the dev team for help with this one!
Regards,
Stefan
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
Please create a combination that you need in the End-User Editor. If it's possible - then we can advice further. If not - I'm afraid that's not possible with this approach. One of the ways would be to catch before operation execute events and see how the annotations are being modified - if it's what you don't want to be - then cancel the operation. Though saving and sharing this document won't do anything outside your program.
Cheers,
Alex
Please create a combination that you need in the End-User Editor. If it's possible - then we can advice further. If not - I'm afraid that's not possible with this approach. One of the ways would be to catch before operation execute events and see how the annotations are being modified - if it's what you don't want to be - then cancel the operation. Though saving and sharing this document won't do anything outside your program.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
It looks like if the annotation is set to ReadOnly or Locked then the change status is disabled. Just one thought, is it possible to enable the button on the context menu if I modify the context menu before showing?
I have tried the following, but am getting an error as it can't find the cmd.annot.status on the menu, I guess I am doing something wrong
Thanks
Simon
It looks like if the annotation is set to ReadOnly or Locked then the change status is disabled. Just one thought, is it possible to enable the button on the context menu if I modify the context menu before showing?
I have tried the following, but am getting an error as it can't find the cmd.annot.status on the menu, I guess I am doing something wrong
Code: Select all
Public Sub OnEvent(pSender As PDFXEdit.IUIX_Obj, pEvent As PDFXEdit.IUIX_Event) Implements PDFXEdit.IUIX_ObjImpl.OnEvent
'Console.WriteLine("Event Code: " & pEvent.Code.ToString)
If pEvent.Code = CInt(&H204) Then
'Console.WriteLine("Event Code: " & pEvent.Code)
Dim pt As PDFXEdit.tagPOINT
pt.x = pEvent.Pos.x
pt.y = pEvent.Pos.y
Dim screenPt As PDFXEdit.tagPOINT
Dim nHitTestCode As Integer = 0
Dim annot As PDFXEdit.IPXC_Annotation = Parent.docPreview.Doc.ActiveView.PagesView.GetAnnotFromPt(pt, nHitTestCode)
If annot IsNot Nothing Then
Dim cmd As PDFXEdit.IUIX_Cmd = Nothing
Dim nMenuIndex As Long
Dim cmdDoc As IUIX_CmdItem
Dim nFlatIndex As Long
' Enables set status context menu item
Dim cmdBar As IUIX_CmdBar
cmdBar = Parent.docPreview.Inst.ActiveMainFrm.View.MenuBar
nFlatIndex = cmdBar.FlatFindFirstItemByCmdName("cmd.annot.status")
cmdDoc = cmdBar.FlatGetItem(nFlatIndex)
cmdDoc.Cmd.Offline = False
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
Better try creating a custom command handler for the status command, use the old handler's methods inside everywhere except GetState method. That should work.
Cheers,
Alex
Better try creating a custom command handler for the status command, use the old handler's methods inside everywhere except GetState method. That should work.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
To be honest I am well out my depth on what you replied, I have been searching the forum, and have put the following code together. I think I am probably completely wrong on what I am doing and was wondering if you maybe able to assist. Sorry to ask, I do always try to get some code at least halfway there.
Thanks
Simon
To be honest I am well out my depth on what you replied, I have been searching the forum, and have put the following code together. I think I am probably completely wrong on what I am doing and was wondering if you maybe able to assist. Sorry to ask, I do always try to get some code at least halfway there.
Code: Select all
Public Sub OnEvent(pSender As PDFXEdit.IUIX_Obj, pEvent As PDFXEdit.IUIX_Event) Implements PDFXEdit.IUIX_ObjImpl.OnEvent
'Console.WriteLine("Event Code: " & pEvent.Code.ToString)
If pEvent.Code = CInt(&H204) Then
'Console.WriteLine("Event Code: " & pEvent.Code)
Dim pt As PDFXEdit.tagPOINT
pt.x = pEvent.Pos.x
pt.y = pEvent.Pos.y
Dim screenPt As PDFXEdit.tagPOINT
Dim nHitTestCode As Integer = 0
Dim annot As PDFXEdit.IPXC_Annotation = Parent.docPreview.Doc.ActiveView.PagesView.GetAnnotFromPt(pt, nHitTestCode)
If annot IsNot Nothing Then
Dim cmd As PDFXEdit.IUIX_Cmd = Nothing
Dim nMenuIndex As Long
Dim cmdDoc As IUIX_CmdItem
Dim nFlatIndex As Long
Dim cmdBar As IUIX_CmdBar
nFlatIndex = cmdBar.FlatFindFirstItemByCmdName("cmd.annot.status")
cmdDoc = cmdBar.FlatGetItem(nFlatIndex)
cmdBar = Parent.docPreview.Inst.ActiveMainFrm.View.MenuBar
Dim item As IUIX_CmdItem = Nothing
cmd.Handler.OnGetItemState(cmdBar, item, Parent.docPreview.Inst.ActiveMainView.Obj, 0)
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
Here's the code sample that I was talking about:
https://gist.github.com/Polaringu/16bb2 ... 7cbe36f4e6
Cheers,
Alex
Here's the code sample that I was talking about:
https://gist.github.com/Polaringu/16bb2 ... 7cbe36f4e6
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
Thanks for the link. I have been trying to get this to work, however I am getting the following error:
Additional information: Unable to cast object of type 'StateCommandHandler' to type 'PDFXEdit.IUIX_CmdHandler'.
On this line of code:
cmd.Handler = cmdHandler
Which I am calling from the OnEvent:
Below is my PDFEditorCommandHandler class code:
Any ideas what I am doing wrong?
Thanks for your help.
Simon
Thanks for the link. I have been trying to get this to work, however I am getting the following error:
Additional information: Unable to cast object of type 'StateCommandHandler' to type 'PDFXEdit.IUIX_CmdHandler'.
On this line of code:
cmd.Handler = cmdHandler
Which I am calling from the OnEvent:
Code: Select all
Public Sub OnEvent(pSender As PDFXEdit.IUIX_Obj, pEvent As PDFXEdit.IUIX_Event) Implements PDFXEdit.IUIX_ObjImpl.OnEvent
If pEvent.Code = CInt(&H204) Then
Dim pt As PDFXEdit.tagPOINT
pt.x = pEvent.Pos.x
pt.y = pEvent.Pos.y
Dim screenPt As PDFXEdit.tagPOINT
Dim nHitTestCode As Integer = 0
Dim annot As PDFXEdit.IPXC_Annotation = Parent.docPreview.Doc.ActiveView.PagesView.GetAnnotFromPt(pt, nHitTestCode)
If annot IsNot Nothing Then
Dim cmdHandler As PDFEditorCommandHandler.StateCommandHandler = Nothing
cmdHandler = New PDFEditorCommandHandler.StateCommandHandler(Parent.docPreview.Inst)
Dim iuiInst As PDFXEdit.IUIX_Inst = CType(Parent.docPreview.Inst.GetExtension("UIX"), PDFXEdit.IUIX_Inst)
Dim cmd As PDFXEdit.IUIX_Cmd = iuiInst.CmdManager.Cmds.Find("cmd.annot.status")
cmdHandler.m_OldStateAsHandler = cmd.Handler
cmd.Handler = cmdHandler
End If
End Sub
Code: Select all
Public Class PDFEditorCommandHandler
Class StateCommandHandler
Public m_Inst As PDFXEdit.IPXV_Inst = Nothing
Private m_nStateID As Long = 0
Public m_OldStateAsHandler As PDFXEdit.IUIX_CmdHandler = Nothing
Public Sub New(ByVal Inst As PDFXEdit.IPXV_Inst)
MyBase.New()
Me.m_Inst = Inst
Me.m_nStateID = Me.m_Inst.Str2ID("cmd.annot.status")
End Sub
Public Sub OnCreateNewCtl(ByVal pCmd As PDFXEdit.IUIX_Cmd, ByVal pParent As PDFXEdit.IUIX_CmdBar, ByRef pCtl As PDFXEdit.IUIX_Obj)
If (pCmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnCreateNewCtl(pCmd, pParent, pCtl)
Else
pCtl = Nothing
End If
End Sub
Public Sub OnGetItemState(ByVal pCmd As PDFXEdit.IUIX_Cmd, ByVal pItem As PDFXEdit.IUIX_CmdItem, ByVal pOwner As PDFXEdit.IUIX_Obj, ByRef nState As Integer)
If (pCmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnGetItemState(pCmd, pItem, pOwner, nState)
Else
nState = CType(PDFXEdit.UIX_CmdItemState.UIX_CmdItemState_Unknown, Integer)
End If
End Sub
Public Sub OnGetCtlSizes(ByVal pItem As PDFXEdit.IUIX_CmdItem, ByRef nSize As PDFXEdit.tagSIZE, ByRef nMinSize As PDFXEdit.tagSIZE, ByRef nMaxSize As PDFXEdit.tagSIZE)
If (pItem.Cmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnGetCtlSizes(pItem, nSize, nMinSize, nMaxSize)
End If
End Sub
Public Sub OnGetItemSubMenu(ByVal pItem As PDFXEdit.IUIX_CmdItem, ByRef pSubMenu As PDFXEdit.IUIX_CmdMenu)
If (pItem.Cmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnGetItemSubMenu(pItem, pSubMenu)
Else
pSubMenu = pItem.SubMenu
End If
End Sub
Public Sub OnNotify(ByVal nCode As Integer, ByVal pCmd As PDFXEdit.IUIX_Cmd, ByVal pItem As PDFXEdit.IUIX_CmdItem, ByVal pOwner As PDFXEdit.IUIX_Obj, ByVal nNotifyData As UInteger)
If (pCmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnNotify(nCode, pCmd, pItem, pOwner, nNotifyData)
End If
End Sub
Public Sub OnDrawItemIcon(ByVal pRC As PDFXEdit.IUIX_RenderContext, ByVal pItem As PDFXEdit.IUIX_CmdItem, ByRef stIconRect As PDFXEdit.tagRECT, ByRef stClip As PDFXEdit.tagRECT)
If (pItem.Cmd.ID = Me.m_nStateID) Then
Me.m_OldStateAsHandler.OnDrawItemIcon(pRC, pItem, stIconRect, stClip)
End If
End Sub
End Class
End Class
Thanks for your help.
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
1) Always use the normal state in the OnGetItemState method if you want it to be always enabled.
2) About this:
You should do it after the control initialization once, not each time in some event (which I doubt that you need). Create a Form class variable and use it.
Cheers,
Alex
1) Always use the normal state in the OnGetItemState method if you want it to be always enabled.
2) About this:
Code: Select all
Public Sub OnEvent(pSender As PDFXEdit.IUIX_Obj, pEvent As PDFXEdit.IUIX_Event) Implements PDFXEdit.IUIX_ObjImpl.OnEvent
If pEvent.Code = CInt(&H204) Then
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
Thanks for your response, however I am still getting the following error:
Error [System]: No such interface supported.
Now running the code on the Form_Shown event, as shown below:
Thanks
Simon
Thanks for your response, however I am still getting the following error:
Error [System]: No such interface supported.
Now running the code on the Form_Shown event, as shown below:
Code: Select all
Private Sub frmDocDesigner_Shown(sender As Object, e As EventArgs) Handles Me.Shown
Try
Dim cmdHandler As PDFEditorCommandHandler.StateCommandHandler = Nothing
cmdHandler = New PDFEditorCommandHandler.StateCommandHandler(Me.docPreview.Inst)
Dim iuiInst As PDFXEdit.IUIX_Inst = CType(Me.docPreview.Inst.GetExtension("UIX"), PDFXEdit.IUIX_Inst)
Dim cmd As PDFXEdit.IUIX_Cmd = iuiInst.CmdManager.Cmds.Find("cmd.annot.status")
cmdHandler.m_OldStateAsHandler = cmd.Handler
cmd.Handler = cmdHandler
Catch ex As Exception
Console.WriteLine(convertErr(ex))
End Try
End Sub
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
What is the StateCommandHandler? The class of your custom handler should be derived from the IUIX_CmdHandler.
Cheers,
Alex
What is the StateCommandHandler? The class of your custom handler should be derived from the IUIX_CmdHandler.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
If you look at the above thread from Thu Dec 07, 2017 9:54 am the StateCommandHandler is derived from the IUIX_CmdHandler, that's why I am slightly confused as I adopted your code from your github link https://gist.github.com/Polaringu/16bb2 ... 7cbe36f4e6
If you look at the above thread from Thu Dec 07, 2017 9:54 am the StateCommandHandler is derived from the IUIX_CmdHandler, that's why I am slightly confused as I adopted your code from your github link https://gist.github.com/Polaringu/16bb2 ... 7cbe36f4e6
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Simon,
Where exactly are you getting this error?
Cheers,
Alex
Where exactly are you getting this error?
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
It errors on this line:
With the following error:
Error [System]: No such interface supported.
Thanks
Simon
It errors on this line:
Code: Select all
cmd.Handler = cmdHandler
Error [System]: No such interface supported.
Thanks
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
Do the next experiment - take the command handler of some command and set it as the command handler to another one. This will show whether there is a problem in your class or in VB.
Cheers,
Alex
Do the next experiment - take the command handler of some command and set it as the command handler to another one. This will show whether there is a problem in your class or in VB.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
I hope I understood you correctly, I have done the following, but I still get this error "Error [System]: No such interface supported."
Thanks
Simon
I hope I understood you correctly, I have done the following, but I still get this error "Error [System]: No such interface supported."
Code: Select all
Private Sub frmDocDesigner_Load(sender As Object, e As EventArgs) Handles Me.Load
Try
Dim cmdHandler As PDFEditorCommandHandler.StateCommandHandler = Nothing
cmdHandler = New PDFEditorCommandHandler.StateCommandHandler(Me.docPreview.Inst)
Dim iuiInst As PDFXEdit.IUIX_Inst = CType(Me.docPreview.Inst.GetExtension("UIX"), PDFXEdit.IUIX_Inst)
Dim cmdRect As PDFXEdit.IUIX_Cmd = iuiInst.CmdManager.Cmds.Find("cmd.tool.annot.square")
Dim cmdLine As PDFXEdit.IUIX_Cmd = iuiInst.CmdManager.Cmds.Find("cmd.tool.annot.line")
cmdRect.Handler = cmdLine
Catch ex As Exception
Console.WriteLine(convertErr(ex))
End Try
End Sub
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
That's not what I meant:
See whether this gives any errors.
Also, please specify what method exactly gives the error.
Cheers,
Alex
That's not what I meant:
Code: Select all
IUIX_Inst iuiInst = (PDFXEdit.IUIX_Inst)pdfCtl.Inst.GetExtension("UIX");
IUIX_Cmd cmd = iuiInst.CmdManager.Cmds.Find("cmd.save");
IUIX_CmdHandler hndl = cmd.Handler;
IUIX_Cmd cmd1 = iuiInst.CmdManager.Cmds.Find("cmd.saveAs");
cmd1.Handler = hndl;
Also, please specify what method exactly gives the error.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
-
- User
- Posts: 510
- Joined: Sat May 16, 2009 1:55 pm
Re: Annotation flags to allow reply and status, but no other modification
Alex,
The code you sent does not error.
However if I run the following code, it errors on line "cmd.Handler = cmdHandler"
Unsure as to why this is happening
Thanks
Simon
The code you sent does not error.
However if I run the following code, it errors on line "cmd.Handler = cmdHandler"
Code: Select all
Dim cmdHandler As PDFEditorCommandHandler.StateCommandHandler = Nothing
cmdHandler = New PDFEditorCommandHandler.StateCommandHandler(Me.docPreview.Inst)
Dim iuiInst As PDFXEdit.IUIX_Inst = CType(Me.docPreview.Inst.GetExtension("UIX"), PDFXEdit.IUIX_Inst)
Dim cmd As PDFXEdit.IUIX_Cmd = iuiInst.CmdManager.Cmds.Find("cmd.annot.status")
Dim hndl As IUIX_CmdHandler = cmd.Handler
cmdHandler.m_OldStateAsHandler = hndl
cmd.Handler = cmdHandler
Thanks
Simon
-
- User
- Posts: 5522
- Joined: Fri Nov 21, 2014 8:27 am
Re: Annotation flags to allow reply and status, but no other modification
Hello Simon,
Well then the problem is in your code. I gave you a sample that works - I'm afraid we can't advice further, because this exceeds the support limits.
What you can do is implement the derivation correctly from the IUIX_CmdHandler interface and that should work.
Cheers,
Alex
Well then the problem is in your code. I gave you a sample that works - I'm afraid we can't advice further, because this exceeds the support limits.
What you can do is implement the derivation correctly from the IUIX_CmdHandler interface and that should work.
Cheers,
Alex
Subscribe at:
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ
https://www.youtube.com/channel/UC-TwAMNi1haxJ1FX3LvB4CQ